manualshive.com logo in svg

Dell Precision Workstation 530, User Manual, Page: 237 / 300

Share
Download
Dell Precision Workstation 530 User Manual Download Page 237

Getting Help

237

World Wide Web

The Internet is your most powerful tool for obtaining information about 
your computer and other Dell products. Through the Internet, you can 
access most of the services described in this section, including AutoTech, 
TechFax, order status, technical support, and product information. 

You can access Dell’s support website at 

http://support.dell.com

. To select 

your country, click the map that appears. The 

Welcome to support.dell.com

 

page opens. Enter your system information to access help tools and 
information.

Dell can be accessed electronically using the following addresses:

•

World Wide Web

http://www.dell.com/
http://www.dell.com/ap/

 (for Asian/Pacific countries only)

http://www.euro.dell.com 

(for Europe only)

http://www.dell.com/la 

(for Latin American countries)

•

Anonymous file transfer protocol (FTP)

ftp.dell.com/

Log in as 

user:

anonymous

, and use your e-mail address as your 

password. 

•

Electronic Support Service

[email protected]
[email protected] (for Asian/Pacific countries only)
support.euro.dell.com (for Europe only)

•

Electronic Quote Service

[email protected]
[email protected] (for Asian/Pacific countries only)

•

Electronic Information Service

[email protected]

Summary of Contents for Precision Workstation 530













































































































































































































































































































Reviews:

No comments