Removing and Installing Parts
115
12
Stand the computer upright.
13
Reconnect the computer and devices to their electrical outlets, and
turn them on.
NOTE:
If enabled, the
Chassis Intrusion
option will cause the following
message to be displayed at the next system start-up:
ALERT! Cover was previously removed.
14
If you installed a sound card, perform the following steps:
a
Enter
system setup
, select
Integrated Devices
and change the
setting for
Sound
to
Off
.
b
Connect external audio devices to the sound card’s connectors.
Do not connect external audio devices to the microphone,
speaker/headphone, or line-in connectors on the computer back
panel (see "
Back-Panel Features
").
15
If you installed an add-in network adapter, perform the following steps:
a
Enter
system setup
, select
Integrated Devices
and change the
setting for
Network Interface Card
to
Off
.
b
Connect the network cable to the add-in network adapter’s
connectors. Do not connect the network cable to the integrated
connector on the computer back panel (see "
Back-Panel
Features
").
Removing an Expansion Card
CAUTION:
Before you perform this procedure, see "
Safety First—
For You and Your Computer
."
NOTICE:
Before disconnecting a device from the computer, wait 10 to 20
seconds after disconnecting the computer from its electrical outlet. Before
removing a component from the system board, verify that the standby power
light on the system board has turned off. To locate this light, see "
System Board
Components
" or the interior service label.
1
Turn off the computer and devices, disconnect them from their
electrical outlets, and wait 10 to 20 seconds.
2
Lay the computer down on its right side.
3
Open the computer cover
.
Summary of Contents for Precision Workstation 530
