Dell PowerVault MD3600f Series Command Line Interface Manual Download Page 161

Page: 161 / 328

Script Commands

161

NOTE:

You can use any combination of alphanumeric characters, hyphens, and

underscores for the names. Command names can have a maximum of 30

characters. If you exceed the maximum character limit, replace square brackets

([ ]) with angle brackets (< >) to overcome this limitation.

host

Name of the host for which you are

defining an HBA host port. You must put

quotation marks (" ") around the host

name.

NOTE:

An HBA host port is a physical

connection on a host adapter that resides

within a host system. An HBA host port

provides host access to the virtual disks in

a storage array. If the host bus adapter has

only one physical connection (one host

port), the terms host port and host bus

adapter are synonymous.

interfaceType

The identifier for the type of interface for

the host port.
You must enter

SAS

. If you do not enter

SAS

, the command attempts to use an

invalid type of interface. A SAS selection

requires an 8-byte WWID.

Parameter

Description

book.book Page 161 Wednesday, June 8, 2011 12:20 PM

Summary of Contents for PowerVault MD3600f Series









































































































































































































































































































































Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Related manuals for PowerVault MD3600f Series

Brands by name

Popular brands

Dell PowerVault MD3600f Series, Command Line Interface Manual

Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Related manuals for PowerVault MD3600f Series

Brands by name

Popular brands