Dell PowerVault MD3600f Series Command Line Interface Manual Download Page 199

Page: 199 / 328

Script Commands

199

You can schedule downloads for multiple physical disks at the same time,

including multiple physical disks in a redundant disk group. Each firmware

image file contains information about the physical disk types on which the

firmware image runs. The specified firmware images can be downloaded only

to a compatible physical disk. Use the download

physicalDisk firmware

command to download a firmware image to a specific physical disk.
The download storageArray physicalDiskFirmware command blocks all I/ O

activity until a download try has been made for each candidate physical disk

or you run the

stop storageArray downloadPhysicalDiskFirmware

command.

When the

download storageArray physicalDiskFirmware

command finishes

downloading the firmware image, each candidate physical disk shows the

download status for each physical disk. One of these statuses is returned:

• Successful
• Unsuccessful With Reason
• Never Attempted With Reason

Download Storage Array NVSRAM

This command downloads NVSRAM values for the storage array RAID

controller module.

Syntax

download storageArray NVSRAM file="

filename

Parameter

Enable Disk Group Security

This command converts a non-secure disk group to a secure disk group.

Parameter

Description

file

File path and name of the file that

contains the NVSRAM values. Valid file

names must end with a

.dlp

extension.

You must put quotation marks (" ")

around the file name.

book.book Page 199 Wednesday, June 8, 2011 12:20 PM

Summary of Contents for PowerVault MD3600f Series









































































































































































































































































































































Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Related manuals for PowerVault MD3600f Series

Brands by name

Popular brands

Dell PowerVault MD3600f Series, Command Line Interface Manual

Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Related manuals for PowerVault MD3600f Series

Brands by name

Popular brands