Dell PowerVault MD3600f Series Command Line Interface Manual Download Page 128

Page: 128 / 328

128

Maintaining a Storage Array

Redistributing Virtual Disks

Redistributing virtual disks returns the virtual disks to their preferred RAID

controller module owners. The preferred RAID controller module ownership

of a virtual disk or disk group is the RAID controller module of an active-

active pair that is designated to own the virtual disks. The preferred owner for

a virtual disk is initially designated when the virtual disk is created. If the

preferred RAID controller module is being replaced or undergoing a firmware

download, ownership of the virtual disks is automatically shifted to the

second RAID controller module. The second RAID controller module

becomes the current owner of the virtual disks. This change is considered to

be a routine ownership change and is reported in the MEL.

CAUTION:

Ensure that a multipath driver is installed, or the virtual disks are not

accessible.

To redistribute virtual disks to their preferred RAID controller modules, run

the following command:

reset storageArray virtualDiskDistribution

NOTE:

You cannot run this command if all virtual disks are currently owned by their

preferred RAID controller module or if the storage array does not have defined

virtual disks.

Under some host operating systems, you must reconfigure the multipath host

driver. You might also need to make operating system modifications to

recognize the new I/O path to the virtual disk.

book.book Page 128 Wednesday, June 8, 2011 12:20 PM

Summary of Contents for PowerVault MD3600f Series









































































































































































































































































































































Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Related manuals for PowerVault MD3600f Series

Brands by name

Popular brands

Dell PowerVault MD3600f Series, Command Line Interface Manual

Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Related manuals for PowerVault MD3600f Series

Brands by name

Popular brands