manualshive.com logo in svg

Dell PowerVault MD3600f Series, Command Line Interface Manual

The Dell PowerVault MD3600f Series is a high-performance storage solution that simplifies data management for businesses. Start utilizing the full potential of this product by downloading the "Getting Started" manual for free from manualshive.com. Unlock the power of the MD3600f with our comprehensive user manual, available for free download.

Share
Download
background image

Using the Remote Replication Premium Feature

95

When you activate the Remote Replication premium feature on the storage 

array, you create two replication repository virtual disks, one for each RAID 

controller module in the storage array. An individual replication repository 

virtual disk is not needed for each remote replication.
When you create the replication repository virtual disks, you specify the 

location of the virtual disks. You can either use existing free capacity, or you 

can create a disk group for the virtual disks from unconfigured capacity and 

then specify the RAID level.
Because of the critical nature of the data being stored, do not use RAID Level 

0 as the RAID level of replication repository virtual disks. The required size of 

each virtual disk is 128 MB, or 256 MB total for both replication repository 

virtual disks of a dual-RAID controller module storage array. In previous 

versions of the Remote Replication premium feature, the replication 

repository virtual disks required less disk storage space and needed to be 

upgraded to use the maximum amount of replication relationships.

Replication Relationships

Before you create a replication relationship, you must enable the Remote 

Replication premium feature on both the primary storage array and the 

secondary storage array. You must also create a secondary virtual disk on the 

secondary site if one does not already exist. The secondary virtual disk must 

be a standard virtual disk of equal or greater capacity than the associated 

primary virtual disk.
When secondary virtual disks are available, you can establish a replication 

relationship in the MD storage management software by identifying the 

primary virtual disk and the storage array that contains the secondary virtual 

disk.
When you first create the replication relationship, a full synchronization 

automatically occurs, with data from the primary virtual disk copied in its 

entirety to the secondary virtual disk.

Data Replication

The RAID controller modules manage data replication between the primary 

virtual disk and the secondary virtual disk. This process is transparent to host 

machines and applications. This section describes how data is replicated 

book.book  Page 95  Wednesday, June 8, 2011  12:20 PM

Summary of Contents for PowerVault MD3600f Series









































































































































































































































































































































Reviews:

No comments

Related manuals for PowerVault MD3600f Series

EUROCOM LP295 Quick Manual preview
LP295
Brand: EUROCOM Pages: 1
Sun Microsystems SPARC classic X Service Manual preview
SPARC classic X
Brand: Sun Microsystems Pages: 198
Arista ARP-3800AP-E01 Series User Manual preview
ARP-3800AP-E01 Series
Brand: Arista Pages: 54
Korg iS50 Installation Manual preview
iS50
Brand: Korg Pages: 5
HP EliteDesk 705 G1 Disassembly Instructions Manual preview
EliteDesk 705 G1
Brand: HP Pages: 10
HP EliteDesk 480 G4 Disassembly Instructions Manual preview
EliteDesk 480 G4
Brand: HP Pages: 9
HP Elite 7000 Microtower Specifications preview
Elite 7000 Microtower
Brand: HP Pages: 4
HP Elite 7000 Microtower Disassembly Instructions Manual preview
Elite 7000 Microtower
Brand: HP Pages: 15
HP Deskpro EC User Manual preview
Deskpro EC
Brand: HP Pages: 3
HP Desktop PC 390 Disassembly Instructions Manual preview
Desktop PC 390
Brand: HP Pages: 7
HP Desktop Computer User Manual preview
Desktop Computer
Brand: HP Pages: 12
HP EliteBook 8760w Quickspecs preview
EliteBook 8760w
Brand: HP Pages: 42
HP EliteBook 8540W Overview preview
EliteBook 8540W
Brand: HP Pages: 41
HP EliteDesk 700 G1 Hardware Reference Manual preview
EliteDesk 700 G1
Brand: HP Pages: 46
HP e-Vectra Quick User Manual preview
e-Vectra
Brand: HP Pages: 30
HP EliteBook 850 G2 Quickspecs preview
EliteBook 850 G2
Brand: HP Pages: 48
HP EliteDesk 705 G1 Hardware Reference Manual preview
EliteDesk 705 G1
Brand: HP Pages: 59
HP Elite 7000 Microtower Troubleshooting Manual preview
Elite 7000 Microtower
Brand: HP Pages: 49

Brands by name

Popular brands

Load more brands