manualshive.com logo in svg

Dell PowerVault MD3600f Series, Command Line Interface Manual

The Dell PowerVault MD3600f Series is a high-performance storage solution that simplifies data management for businesses. Start utilizing the full potential of this product by downloading the "Getting Started" manual for free from manualshive.com. Unlock the power of the MD3600f with our comprehensive user manual, available for free download.

Share
Download
background image

140

Script Commands

Commands Listed Alphabetically

Following are the script commands listed alphabetically.

Activate Remote Replication Feature

 

NOTE: 

This command valid only with Fibre Channel storage arrays.

This command creates the replication repository virtual disk and activates the 

Remote Replication premium feature. When using this command, the 

replication repository virtual disk can be defined in one of three ways:

• User-defined physical disks
• User-defined disk group
• User-defined number of physical disks

If you choose to define a number of physical disks, the RAID controller 

module firmware chooses which physical disks to use for the replication 

repository volume.

Syntax 

User-Defined Physical Disks

activate storageArray feature=remoteReplication
repositoryRAIDLevel=(1 | 5 | 6)
repositoryPhysicalDisks=(

enclosureID1,slotID1 ... 

enclosureIDn,slotIDn

)

repositoryDiskGroupUserLabel=[

diskGroupName

]

physicalDiskMediaType=(HDD | SSD | unknown | 
allMedia)
physicalDiskType=(SAS)
[enclosureLossProtect=(TRUE | FALSE)]

User-Defined Disk Group

activate storageArray feature=remoteReplication
repositoryDiskGroup=

diskGroupName

[freeCapacityArea=

freeCapacityIndexNumber

]

book.book  Page 140  Wednesday, June 8, 2011  12:20 PM

Summary of Contents for PowerVault MD3600f Series









































































































































































































































































































































Reviews:

No comments

Related manuals for PowerVault MD3600f Series

iDOT V Series User Handbook Manual preview
V Series
Brand: iDOT Pages: 28
IEI Technology HTB-100-HM170 User Manual preview
HTB-100-HM170
Brand: IEI Technology Pages: 131
Spectra PowerBox 310 Series User Manual preview
PowerBox 310 Series
Brand: Spectra Pages: 116
Everex Impact GD3300 User Manual preview
Impact GD3300
Brand: Everex Pages: 47
Radio Shack TRS-80 Model 3 Operation And Reference Manual preview
TRS-80 Model 3
Brand: Radio Shack Pages: 276
IBM System x3200 M3 Product Manual preview
System x3200 M3
Brand: IBM Pages: 42
Digital Equipment DECstaion 5000 240 Hardware Installation Manual preview
DECstaion 5000 240
Brand: Digital Equipment Pages: 62
Chipsee AI0-CM4-101 User Manual preview
AI0-CM4-101
Brand: Chipsee Pages: 21
Dell Inspiron 3470 Owner'S Manual preview
Inspiron 3470
Brand: Dell Pages: 51
Dell INSPIRON Inspiron 1100 Owner'S Manual preview
INSPIRON Inspiron 1100
Brand: Dell Pages: 95
Dell Inspiron 24-5400 Setup And Specifications preview
Inspiron 24-5400
Brand: Dell Pages: 26
Dell Inspiron 3472 Setup And Specifications preview
Inspiron 3472
Brand: Dell Pages: 20
Acer Predator PO3-600 E Manual preview
Predator PO3-600 E
Brand: Acer Pages: 100
Advanced Micro Computers Am96/4116A User Manual preview
Am96/4116A
Brand: Advanced Micro Computers Pages: 86
Penpower Technology Wireless Pen User Manual preview
Wireless Pen
Brand: Penpower Technology Pages: 82
Innovative WINSTON WORKSTATION Installation Instructions Manual preview
WINSTON WORKSTATION
Brand: Innovative Pages: 11
Nexcom VTC 1911 User Manual preview
VTC 1911
Brand: Nexcom Pages: 71
Nexcom NISE 300 User Manual preview
NISE 300
Brand: Nexcom Pages: 96

Brands by name

Popular brands

Load more brands