Dell PowerVault MD3600f Series Command Line Interface Manual Download Page 243

Page: 243 / 328

Script Commands

243

IPv6RouterAddress

The IP address of IPv6 router that connects two or

more logical subnets. The address format for the

IPv6 router is (0–FFFF):(0–FFFF):(0–FFFF):(0–

FFFF): (0–FFFF):(0–FFFF):(0–FFFF):(0– FFFF).

iscsiHostPort

The values that support this parameter are listed in

the Syntax Element Statement Data table that

follows. Many settings are possible, including

setting the IP address, the gateway address, the

subnet mask address, the IPv4 priority, and the

IPv6 priority.

rloginEnabled

The setting for whether the remote login feature is

turned on or turned off. To turn on the remote

TRUE

. To turn

off the remote login feature, set this parameter to

FALSE

serviceAllowedIndicator

The setting for whether the Service Action Allowed

indicator light is turned on or turned off. To turn

on the Service Action Allowed indicator light, set

this parameter to

. To turn off the Service Action

Allowed indicator light, set this parameter to

off

Parameter

Description

book.book Page 243 Wednesday, June 8, 2011 12:20 PM

Summary of Contents for PowerVault MD3600f Series









































































































































































































































































































































Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Dell PowerVault MD3600f Series, Command Line Interface Manual, Page: 243 / 328

Search results

Summary of Contents for PowerVault MD3600f Series

Reviews: