Dell PowerVault MD3600f Series Command Line Interface Manual Download Page 195

Page: 195 / 328

Script Commands

195

Parameters

Download Physical Disk Firmware

This command downloads a firmware image to a physical disk.

CAUTION:

Downloading physical disk firmware incorrectly can result in damage

to the physical disks or loss of data.

Before attempting to download physical disk firmware, you must take the

following precautions:

Stop all I/O activity to the storage array before downloading the

firmware image.

Ensure the firmware image file is compatible with the physical disk

enclosure. If you download a file that is not compatible with the selected

physical disk enclosure, the enclosure might become unusable.

Parameter

Description

enclosure

Identifies the enclosure to which to load

new firmware. Enclosure ID values are 0

to 99. You must put brackets ([ ]) around

the enclosure ID value.
You can use the following parameters:

• The

allEnclosures

parameter, which

downloads new firmware to all of the

EMMs in the storage array

• The

enclosure

parameter, which

downloads new firmware to a specific

EMM. If you need to download new

firmware to more than one EMM, but

not all RAID controller modules, you

must enter this command for each

storage array.

file

File path and file name of the file that

contains the firmware image. You must

put quotation marks (" ") around the

firmware image file path and file name.

book.book Page 195 Wednesday, June 8, 2011 12:20 PM

Summary of Contents for PowerVault MD3600f Series









































































































































































































































































































































Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Related manuals for PowerVault MD3600f Series

Brands by name

Popular brands

Dell PowerVault MD3600f Series, Command Line Interface Manual

Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Related manuals for PowerVault MD3600f Series

Brands by name

Popular brands