Dell PowerVault MD3600f Series Command Line Interface Manual Download Page 196

Page: 196 / 328

196

Script Commands

Do not make any configuration changes to the storage array while

downloading the physical disk firmware. Attempting to make a

configuration change can cause the firmware download to fail and make

the selected physical disks unusable.

You can use this command to test the firmware on one physical disk before

installing the firmware on all of the physical disks in a storage array. (Use the

download storageArray physicalDiskFirmware

command to download

firmware on all of the physical disks in the storage array.) This command

blocks all I/O activity until the download finishes or fails. The download

returns one of the following statuses:

• Successful
• Unsuccessful With Reason
• Never Attempted With Reason.

Syntax

download physicalDisk [

enclosureID,slotID

]

firmware file="

filename

Parameters

Parameter

Description

physicalDisk

Physical disk to which to download the

firmware image. Specify the enclosure ID

and slot ID for the physical disk.

Enclosure ID values are 0 to 99. Slot ID

values are 0 to 31. You must put brackets

([ ]) around the enclosure ID value and

slot ID value.

filename

File path and file name of the file that

contains the firmware image. You must

put quotation marks (" ") around the

firmware image file path and file name.

book.book Page 196 Wednesday, June 8, 2011 12:20 PM

Summary of Contents for PowerVault MD3600f Series









































































































































































































































































































































Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Related manuals for PowerVault MD3600f Series

Brands by name

Popular brands

Dell PowerVault MD3600f Series, Command Line Interface Manual

Search results

Summary of Contents for PowerVault MD3600f Series

Reviews:

Related manuals for PowerVault MD3600f Series

Brands by name

Popular brands