Dell PowerVault MD3600f Series, Command Line Interface Manual

Page: 238 / 328

238
Script Commands
Set iSCSI Target Properties
This command defines properties for an iSCSI target.
Syntax
set iscsiTarget [“ iscsiID ”]
(authenticationMethod=(none | chap) |
chapSecret=”
securityKey ” |
targetAlias=” userLabel ”)
Parameters
NOTE:
Challenge Handshake Authentication Protocol (CHAP) is a protocol that
authenticates the peer of a connection. CHAP is based upon the peers sharing a
“secret.” A secret is a security key that is similar to a password.
NOTE:
Use the
chapSecret
parameter only for initiators requiring mutual
authentication.
NOTE:
The
targetAlias
is a descriptive name that you can give to the target to help
make it easier to identify. You can use any combination of alphanumeric characters,
hyphens, and underscores for the
targetAlias
. The
targetAlias
can have a maximum
of 30 characters.
Parameter Description
iSCSIID
The iSCSI target for which you want to
set properties. Enclose the name in
double quotation marks (“ ”). You must
also enclose the iscsiID in either square
brackets ([ ]) or angle brackets (< >).
authenticationMethod
The means of authenticating your iSCSI
session.
chapSecret
The password that you want to use to
authenticate a peer connection.
targetAlias
The name that you want to use for the
target.
book.book Page 238 Wednesday, June 8, 2011 12:20 PM