About Your System
35
Keyboard data
line failure
Keyboard stuck
key failure
Keyboard cable connector is
loose or improperly
connected, defective
keyboard, or defective
keyboard/mouse controller.
Check the keyboard
connection to the system. If
the problem persists, try
another keyboard, or see
"Getting Help" on page 205.
Keyboard fuse has
failed
Overcurrent has been
detected at the keyboard
connector.
See "Getting Help" on
page 205.
Manufacturing
mode detected
System is in manufacturing
mode.
Restart to take the system
out of manufacturing mode.
Memory address
line failure at
address
, read
value
expecting
value
Memory double
word logic
failure at
address
, read
value
expecting
value
Memory odd/even
logic failure at
address,
read
value
expecting
value
Memory
write/read
failure at
address
, read
value
expecting
value
Faulty or improperly installed
memory modules.
See "Troubleshooting System
Memory" on page 173.
Memory tests
terminated by
keystroke
POST memory test
terminated by pressing the
spacebar.
Information only.
Table 1-6.
System Messages
(continued)
Message
Causes
Corrective Actions
Summary of Contents for PowerEdge T605
