Steps
1.
Insert the intrusion switch into the intrusion switch slot.
2.
Slide the intrusion switch until it locks into position.
3.
Route the intrusion switch cable through the cable routing tab.
4.
Connect the intrusion switch cable to the connector on the system board.
Figure 14. Installing the intrusion switch
1.
intrusion switch slot
2. intrusion switch
3. intrusion switch cable
Next steps
1.
Follow the procedure listed in After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Removing the intrusion switch
Internal dual SD module (optional)
The Internal Dual SD module (IDSDM) provides you with a redundant SD card solution. You can configure
the IDSDM for storage or as the OS boot partition. The IDSDM card offers the following features:
• Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and
provides redundancy.
NOTE: When the
Redundancy
option is set to
Mirror Mode
in the
Integrated Devices
screen of
System Setup, the information is replicated from one SD card to another.
68
