3.
Remove the 1.8 inch SSD cage.
NOTE: The 1.8 inch SSD backplane is installed on the back of the 1.8 inch SSD cage.
Steps
1.
Slide the SSD backplane tab into the slot on the SSD cage.
2.
Align the screw hole on the SSD backplane with the screw hole on the SSD cage.
3.
Secure the SSD backplane to the SSD cage by using the screw.
Figure 61. Installing the 1.8 inch SSD backplane
1.
screw
2. SSD backplane
3. tab on the SSD backplane
4. slot on the SSD cage
5. SSD cage
Next steps
1.
Install the SSD cage.
2.
Follow the procedure listed in after working inside your system.
Related Links
Safety instructions
Installing the 1.8 inch uSATA SSD cage
Removing the 1.8 inch uSATA SSD backplane
Internal USB memory key (optional)
An optional USB memory key installed inside your system can be used as a boot device, security key, or
mass storage device.
To boot from the USB memory key, configure the USB memory key with a boot image and then specify
the USB memory key in the boot sequence in System Setup.
The internal USB port must be enabled in
Internal USB Port
option in the
Integrated Devices
screen of
System Setup
.
The internal USB port is located on the system board.
138