manualshive.com logo in svg

Dell PowerEdge 4200 Series, Administrator'S Manual, Page: 177 / 440

Share
Download
Dell PowerEdge 4200 Series Administrator'S Manual Download Page 177

Services 

Configuration | 177

Chapter 6

Services Configuration

This chapter provides information and configuration tasks specific to the 

Services 

pages on the 

SRA Web-based management interface, including configuring settings, bookmarks, and 
policies for various application layer services, such as HTTP/HTTPS, Citrix, RDP, and VNC.

This chapter contains the following sections:

•

“Services > Settings” section on page 177

•

“Services > Bookmarks” section on page 180

•

“Services > Policies” section on page 187

Services > Settings

This section provides an overview of the 

Services > Settings

 page and a description of the 

configuration tasks available on this page.

•

“HTTP/HTTPS Service Settings” section on page 178

•

“Citrix Service Settings” section on page 179

•

“Global Portal Settings” section on page 179

•

“One Time Password Settings” section on page 179

Summary of Contents for PowerEdge 4200 Series

























































































































































































































































































































































































































































Reviews:

No comments