Dell PowerEdge 4200 Series, Administrator'S Manual, Page: 169 / 440

Portals Configuration | 169
Configuring a Policy on VASCO IdentiKey
Follow these steps to add a new policy in the VASCO Identikey Web Administration interface:
Step 1
Log in to the Vasco Identikey Web Administration window.
Step 2
Click the Policies tab and select Create .
Note
There are policies available by default, and you can also create new policies to suit
your needs
Step 3
Fill in a policy name and choose the option most suitable in your situation. If you want the policy
to inherit a setting from another policy, choose the inherit option. If you want to copy an existing
policy, choose the copy option, and if you want to make a new policy, choose the create option.
Note
Configure the policy properties to use the appropriate back-end server. This may be
the same authentication service as previously used in the SRA appliance.
Use the following settings for the policy:
Registering the SRA as a Client
To register the SRA appliance as a VASCO client:
Step 1
In the Vasco Identikey Web Administration window, click the Clients Tab and choose Register .
Step 2
Select RADIUS Client for Client Type .
Step 3
Enter the IP address of the SRA appliance.
Step 4
In the Policy ID field, select your new policy.
Step 5
Fill in the Shared Secret you entered for the RADIUS server properties on the SRA appliance.
Step 6
Click Create .
Configuring a VASCO IdentiKey User
To create a new user:
Step 1
In the Vasco Identikey Web Administration window, click the Users tab and select Create .
Step 2
Fill in the User ID field.
Step 3
Select the Domain .
Step 4
Select the Organizational Unit .
Step 5
Click the Create button.
Local Auth Default (DIGIPASS/Password)
Back-End Auth Default (None)
Dynamic User Registration Default (No)
Password Autolearn Default (No)
Stored Password Proxy Default (No)
Windows Group Check Default (No Check)