CLI Commands
The following table summarizes the equivalent CLI commands for items in the
Class of Service/Traffic Classes
page.
Example
Console(config)#queue cos-map 0 0 1 2
Console(config)#queue cos-map 1 3
Console(config)#queue cos-map 2 4 5
Console(config)#queue cos-map 3 6 7
Console#show queue cos-map
Information of Eth 1/1
Queue ID Traffic class
--------
-------------
0 0 1 2
1 3
2 4 5
3 6 7
.
.
.
Queue Scheduling
In the
Queue Scheduling
page, you can configure Weighted Round Robin (WRR) queueing for the switch ports.
The following options are available:
l
WRR Setting Table
—
Displays a list of weight values for each switch CoS queue
l
Weight Value
—
Sets a new weight value for a CoS
To change a table setting, select the entry in the
WRR Setting Table
, type the new weight in the
Weight Value
box, and then click
Apply Changes
. If you
don't want to save the changes, click
Refresh
.
Command
Usage
queue cos-map
queue_id
[
cos1 ... cosn
] Assigns traffic class values to the CoS priority queues.
Use the
no form
command to set the CoS map to the default values.
show queue cos-map [interface]
Shows the CoS priority map.
