CLI Commands
The following table summarizes the equivalent CLI commands for items in the
Switch/General/Asset
page.
Example
Console(config)#hostname Server Chassis 35
Console(config)#snmp-server contact Paul
Console(config)#snmp-server location WC-19
Console(config)#exit
Console#show system
System description: PowerConnect 5224
System OID string: 1.3.6.1.4.1.674.10895.4
System information
System Up time: 0 days, 0 hours, 14 minutes, and 17.93 seconds
System Name : Server Chassis 35
System Location : WC
-19
System Contact : Paul
MAC address : 00
-00-e8-00-00-02
Web server : enable
Web server port : 80
POST result :
--- Performing Power-On Self Tests (POST) ---
UART Loopback Test ..................... PASS
Timer Test ............................. PASS
CACHE Test.............................. PASS
DRAM Test .............................. PASS
I2C Initialization ..................... PASS
Runtime Image Check .................... PASS
PCI Device Check ....................... PASS
Switch Driver Initialization ........... PASS
Command
Usage
show system
Displays system information
hostname
name
Specifies or modifies the system name for this device
snmp-server contact
string
Sets the system contact (sysContact) string
snmp-server location
text
Sets the system location string
