manualshive.com logo in svg

Dell PowerConnect 5224, System User'S Manual

Share
Download
Dell PowerConnect 5224 System User'S Manual Download Page 31

¡

'

F

': Port is forbidden from automatically joining the VLAN through GVRP. For more information, see "

GVRP

." 

 

¡

'

BLANK

': Port is not a member of the VLAN. Packets associated with this VLAN will not be transmitted by the port. 

 

The VLAN tagging option is a standard set by the IEEE to facilitate the spanning of VLANs across multiple switches. For more information, see "

VLANs

" and the 

IEEE Std 802.1Q-1998 Virtual Bridged Local Area Networks. 

To save any changes you make in this page, click 

Apply Changes

. If you don't want to save the changes, click 

Refresh

. 

Adding VLAN Group 

1.

 

Select 

Add a new VLAN

 from the 

Show VLAN

 drop-down menu.  

 

2.

 

Complete the 

VLAN Name

 and 

VLAN ID

 fields.  

 

3.

 

Add VLAN members.  

 

See "

VLAN Membership

" for more information on VLAN members. 

4.

 

Click 

Apply Changes

.  

 

Removing VLAN Group 

1.

 

Select the VLAN that you want to remove from the 

Show VLAN

 drop- down menu.  

 

2.

 

Check the 

Remove VLAN

 box for the VLAN that you want to remove.  

 

3.

 

Click 

Apply Changes

.  

 

Adding VLAN Membership 

1.

 

Select the VLAN that you want to edit from the 

Show VLAN

 drop- down menu.  

 

2.

 

Change the VLAN member by clicking the port icon until the desired state [

T

 (tagged) or 

U 

(untagged)] or a blank appears.  

 

3.

 

Click 

Apply Changes

.  

 

Removing VLAN Membership 

1.

 

Select the VLAN that you want to edit under the 

Show VLAN

 drop- down menu.  

 

2.

 

Change the VLAN member by clicking the port icon until the filed is blank.  

 

3.

 

Click 

Apply Changes

.  

 

  

CLI Commands 

The following table summarizes the equivalent CLI commands for items in the 

VLAN/VLAN Membership 

page. 

NOTE: 

If you remove a VLAN group with existing port members, the ports will rejoin the default VLAN in untagged mode. 

Command 

Usage 

vlan database 

Allows you to enter VLAN database mode. 

vlan 

vlan-id

 [name 

vlan-name

] 

media ethernet [state {suspend | 
active}] 

Configures a VLAN. 

Use the 

no form 

command to restore the default or delete a VLAN. 

interface vlan 

vlan-id

 

Allows you to enter interface configuration mode for VLANs and to 
configure a physical interface. 

switchport allowed vlan {add 

vlan-list

 [tagged | untagged] | 

remove 

vlan-list

}  

Configures untagged and tagged ports. 

The parameter 

vlan-list

 is the list of VLAN identifiers being added. 

Separate nonconsecutive VLAN identifiers with a comma and no spaces; 

Summary of Contents for PowerConnect 5224










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands