CLI Commands
The following table summarizes the equivalent CLI commands for items in the
Switch/IP Address
page.
Example
Console(config)#interface vlan 1
Console(config-if)#ip address 192.168.1.5 255.255.255.0
Console(config-if)#exit
Console(config)#ip default-gateway 192.168.1.254
Console(config)#
DHCP
In the
DHCP
page, click
Restart DHCP
to release the current IP address and obtain a new one through DHCP.
CLI Commands
The following table summarizes the equivalent CLI command for items in the
Switch/IP Address/DHCP
page.
Security
The
Security
page contains links to the following information:
Command
Usage
ip address {
ip-address
netmask
| bootp | dhcp}
Sets the primary IP address for this device. Use the
no form
command to
remove the IP address, or to disable IP address assignment through BOOTP or
DHCP.
ip default-gateway
gateway
Establishes a static route between the switch and management stations that
exist on another network segment.
show ip interface
Displays the usability status of an IP interface.
show ip redirects
Shows the default gateway configured for this device.
NOTICE:
If
Restart DHCP
is selected when IP settings have been configured statically, a warning message indicating that the IP Address Mode is not
set to DHCP displays.
Command
Usage
ip dhcp restart
Resubmits a DCHP client request
