Dell PowerConnect 5224 System User'S Manual Download Page 18

Page: 18 / 73

To save any changes you make in this page, click

Apply Changes

. If you don't want to save the changes, click

Refresh

CLI Commands

The following table summarizes the equivalent CLI command for items in the

Switch/Jumbo Frame

page.

Example

Console(config)#jumbo frame

Console(config)#

Firmware Upgrade

From the

Firmware

page, you can configure the system to download a new version of the management software. The switch can contain two software code

files, one of which is set as the

Start-Up

file. This allows you to try a new version of the software without overwriting the previous version.

The

Firmware

page contains the following fields:

Current Operation Code Version

It also contains the following editable fields:

TFTP Server IP Address

—

Specifies the server from which the system must retrieve the new version of the software.

Source File Name

—

Specifies the path and name of the software file to download.

Destination File Name

—

Specifies the file to be replaced.

Remove Operation Code Image File

—

Deletes a software file from the switch.

Start-Up Operation Code File Name

—

Indicates which Operation Code file you want to run. Select the filename from the drop-down menu.

Uploading Operation Code to a Server

In the

Transfer Operation Code Image File to Server

field, enter the IP address of the Trivial File Transfer Protocol (TFTP) server in the

TFTP Server

IP Address

field.

In the

Source File Name

field, select the file to upload from the drop- down menu.

In the

Destination File Name

field, type a name for the file.

Click

Transfer to Server

Downloading Operation Code from a Server

In the

Transfer Operation Code Image File from Server

field, enter the IP address of the TFTP server in the

TFTP Server IP Address

field.

In the

Source File Name

field, type the filename of the software code file to download.

For the

Destination File Name

, select a filename from the drop-down menu to replace an existing file, or specify a new filename (with no more than 32

characters). Filenames are case sensitive and cannot contain spaces. The switch can contain only two software code files. You cannot download a third
file; you must first replace an existing file or remove a file.

Click

Transfer from Server

Deleting an Operation Code File from the Switch

In the

Remove Operation Code Image File

field, select the file to delete from the drop-down menu.

Click

Remove File

Command

Usage

jumbo
frame

Use this command to enable jumbo frames to be forwarded through the switch. Use the

form to disable jumbo frames.

NOTE:

The switch is shipped with one software code file installed (the filename is similar to

PC5224_v1.00.00.00

), which is set as the start- up file.

Summary of Contents for PowerConnect 5224










































































Search results

Summary of Contents for PowerConnect 5224

Reviews:

Brands by name

Popular brands

Dell PowerConnect 5224, System User'S Manual

Search results

Summary of Contents for PowerConnect 5224

Reviews:

Brands by name

Popular brands