manualshive.com logo in svg

Dell PowerConnect 5224, System User'S Manual

Share
Download
Dell PowerConnect 5224 System User'S Manual Download Page 23

Console(config-if)#  

Console(config-if)#description RD SW#3  

Console(config-if)#no negotiation  

Console(config-if)#speed-duplex 100half  

Console(config-if)#flowcontrol  

Trunk Configuration  

On the 

Trunk Configuration 

page, you can enable and disable the aggregate port links that have been created on the switch. To set up trunks and select port 

members, use the 

Link Aggregation

 page. 

For each trunk number listed in the 

Trunk

 column, you can change the following parameters listed by column name on the screen: 

l

Name/Type

 

—

 Allows a user-defined label for the trunk and also indicates the type of ports in the trunk 

 

l

Admin/Oper 

—

 Allows the network administrator to manually disable a trunk and also indicates the status of the link: up or down 

 

l

Speed/Duplex Mode 

—

 Allows the manual selection of port speed and duplex mode and also indicates the current speed and mode of member ports 

 

l

Flow Control 

—

 Allows automatic or manual selection of support for flow control and also indicates the type of flow control currently in use 

 

l

Autonegotiation/Port Capabilities 

—

 Allows autonegotiation to be enabled/disabled for all ports in the trunk and also indicates the capabilities of the 

port members 
 

To save any changes you make in this page, click 

Apply Changes

. If you don't want to save the changes, click 

Refresh

. 

  

CLI Commands 

The following table summarizes the equivalent CLI commands for items in the 

Ports/Trunks Configuration 

page. 

Example  

Console(config)#interface port-channel 1  

Console(config-if)#  

Console(config-if)#description RD SW#3  

Command 

Usage 

interface port-channel 

channel-id

 

Configures a trunk and enters interface configuration 
mode. 

shutdown 

Disables a trunk interface. 

To restart a disabled interface, use the 

no form

 command. 

description 

string

 

Adds a description to a trunk interface. 

speed-duplex {1000full | 100full | 100half | 10full 
| 10half} 

Configures the speed and duplex mode of a given 
interface when autonegotiation is disabled. 

negotiation 

Enables autonegotiation for a given interface. 

To disable autonegotiation, use the 

no form

 command. 

capabilities {1000full | 100full | 100half | 10full | 
10half | flowcontrol | symmetric} 

Advertises the trunk capabilities of a given interface 
during autonegotiation. 

flowcontrol 

Enables flow control. 

To disable flow control, use the 

no form

 command. 

show interfaces status port-channel 

channel-id

 

Displays status for enabled interfaces. 

show interfaces switchport [port-channel 

channel-id

] 

Displays the configuration for a trunk. 

Summary of Contents for PowerConnect 5224










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands