Dell P2423DE User Manual Download Page 5

Page: 5 / 94

│

Using the joystick control . . . . . . . . . . . . . . . . . 56
Using the On-Screen Display (OSD) menu . . . . . . . . 57

Accessing the Menu Launcher . . . . . . . . . . . . . . . . . . . 57

Using the navigation keys . . . . . . . . . . . . . . . . . . . . . . 58

Accessing the menu system . . . . . . . . . . . . . . . . . . . . 59

Menu and Power button lock . . . . . . . . . . . . . . . . . . . . 71

OSD warning messages . . . . . . . . . . . . . . . . . . . . . . . 73

Setting the maximum resolution . . . . . . . . . . . . . 79
Using the tilt, swivel, and vertical extension . . . . . . . 80

Tilt, swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Vertical Extension . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Rotating the monitor . . . . . . . . . . . . . . . . . . . . . . . . 81

Rotate clockwise . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Rotate counterclockwise . . . . . . . . . . . . . . . . . . . . . . 82

Adjusting the rotation display settings of your system . . . . . . 83

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Built-in diagnostics  . . . . . . . . . . . . . . . . . . . . 85
Common problems .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   87
Universal Serial Bus (USB) specific problems  . . . . . . 92

Regulatory information . . . . . . . . . . . . . . . . . . . . . 94

FCC notices (U.S. Only) and other regulatory information 94
EU product database for energy label and product
information sheet . . . . . . . . . . . . . . . . . . . . . 94
Contacting Dell. . . . . . . . . . . . . . . . . . . . . . . 94

Summary of Contents for P2423DE































































































Search results

Summary of Contents for P2423DE

Reviews:

Related manuals for P2423DE

Brands by name

Popular brands

Dell P2423DE, User Manual

Search results

Summary of Contents for P2423DE

Reviews:

Related manuals for P2423DE

Brands by name

Popular brands