Dell OptiPlex GX400 User Manual Download Page 67

Page: 67 / 88

Website:

http://support.euro.dell.com

E-mail: [email protected]

Italy (Milan)

International Access Code:

Country Code:

City Code:

Home and Small Business

Technical Support

02 577 826 90

Customer Care

02 696 821 14

Fax

02 696 821 13

Switchboard

02 696 821 12

Website:

http://support.euro.dell.com

E-mail: http://support.euro.dell.com/it/it/emaildell/

Corporate

Technical Support

02 577 826 90

Customer Care

02 577 825 55

Fax

02 575 035 30

Switchboard

02 577 821

Website:

http://support.euro.dell.com

E-mail: http://support.euro.dell.com/it/it/emaildell/

Jamaica

General Support

1-800-682-3639

Japan (Kawasaki)

International Access Code:

001

Country Code:

City Code:

Technical Support (Server)

Technical Support Outside of Japan (Server)

toll free: 0120

-1984-35

81-44-556-4152

Technical Support (Dimension™ and Inspiron™)

Technical Support Outside of Japan (Dimension and Inspiron)

toll free: 0120

-1982-26

81-44-520-1435

Technical Support (Dell Precision™, OptiPlex™ and Latitude™)

Technical Support Outside of Japan (Dell Precision, OptiPlex, and Latitude)

toll free: 0120

-1984-33

81-44-556-3894

24-Hour Automated Order Service

044 556

-3801

Customer Care

044 556

-4240

Business Sales Division (up to 400 employees)

044 556 3494

Preferred Accounts Division Sales (over 400 employees)

044 556

-3433

Large Corporate Accounts Sales (over 3500 employees)

044 556

-3440

Public Sales (Government Agencies, Educational Institutions, and Medical
Institutions)

044 556 3440

Global Segment Japan

044 556 3469

Individual User

044 556 1657

Faxbox Service

044 556

-3490

Switchboard

044 556

-4300

Website:

http://support.jp.dell.com

Korea (Seoul)

International Access Code:

001

Country Code:

City Code:

Technical Support

toll free: 080

-200-3800

Sales

toll free: 080

-200-3600

Customer Service (Seoul, Korea)

toll free: 080-200-3800

Customer Service (Penang, Malaysia)

604 633 4949

Fax

2194-6202

Switchboard

2194-6000

Latin America

Customer Technical Support (Austin, Texas, U.S.A.)

512 728

-4093

Customer Service (Austin, Texas, U.S.A.)

512 728

-3619

Fax (Technical Support and Customer Service)(Austin, Texas, U.S.A.)

512 728

-3883

Sales (Austin, Texas, U.S.A.)

512 728

-4397

SalesFax (Austin, Texas, U.S.A.)

512 728

-4600

or 512 728

-3772

Luxembourg

International Access Code:

Country Code:

352

Technical Support (Brussels, Belgium)

02 481 92 88

Home/Small Business Sales (Brussels, Belgium)

toll free: 080016884

Corporate Sales (Brussels, Belgium)

02 481 91 00

Customer Care (Brussels, Belgium)

02 481 91 19

Fax (Brussels, Belgium)

02 481 92 99

Switchboard (Brussels, Belgium)

02 481 91 00

Website:

http://support.euro.dell.com

E-mail: [email protected]

Macau

Technical Support

toll free: 0800 582

Summary of Contents for OptiPlex GX400

























































































Search results

Summary of Contents for OptiPlex GX400

Reviews:

Related manuals for OptiPlex GX400

Brands by name

Popular brands

Dell OptiPlex GX400, User Manual

Search results

Summary of Contents for OptiPlex GX400

Reviews:

Related manuals for OptiPlex GX400

Brands by name

Popular brands