manualshive.com logo in svg

Dell OptiPlex GX400, User Manual, Page: 61 / 88

Share
Download
Dell OptiPlex GX400 User Manual Download Page 61

IRQ2

Used by interrupt controller 1 to enable IRQ8 through IRQ15

IRQ3

Used by serial port 2

IRQ4

Used by serial port 1

IRQ5

Available

IRQ6

Used by the diskette/tape drive controller

IRQ7

Used by the parallel port

IRQ8

Used by the real-time clock (RTC)

BIOS Recovery Utility  

If your system loses power and beeps constantly but does not boot when power is restored, the basic input/output system (BIOS) is probably corrupted. To 
restore the BIOS, perform the following steps:  

1.

 

Disconnect the system from its power source.  

 

2.

 

Go to another working system, and download the BIOS flash executable utility for the system from the 

File Library

 located on the Dell support website 

at 

http://support.dell.com

.  

 

3.

 

On the working system, go to an MS-DOS prompt and type the command 

xxxxx

 -writehdrfile

 (where 

xxxxx

 is the name of the BIOS flash executable 

utility you downloaded).  
 

Running this utility generates a file with an 

.hdr

 extension.  

4.

 

Copy the 

.hdr

 file to a diskette.  

 

5.

 

Insert the diskette into the diskette drive of the corrupted system and turn it on.  

 

The system automatically flashes the BIOS from the diskette.  

6.

 

When the system begins to restart and the Dell logo screen appears, remove the diskette from the diskette drive so that the system does not boot 

from the diskette again.  
 

Back to Contents Page

 

IRQ9

Used by the advanced configuration and power interface (ACPI)

IRQ10

Available

IRQ11

Used by the USB controllers

IRQ12

Used by the mouse port

IRQ13

Used by the math coprocessor (if applicable)

IRQ14

Used by the primary IDE controller

IRQ15

Used by the secondary IDE controller

Summary of Contents for OptiPlex GX400

























































































Reviews:

No comments