system problems, you can use the System Restore feature to select any of the restore points presented through the System Restore Wizard.
If problems occur after installing a device driver, you should first attempt to use
Driver Rollback
. If that is unsuccessful, then use System Restore.
To return your computer to a previous, stable condition, perform the following steps:
1.
Click the
Start
button, point to
All Programs
—
> Accessories
—
> System Tools
, and then click
System Restore
.
2.
Select
Restore my computer to an earlier time
and click
Next>
.
The
Select a Restore Point
screen appears. The calendar on the left indicates in bold the dates on which restore points were
created.
3.
Click a date, click a restore point for that date, and click
Next>
.
4.
Click
Next>
to confirm the restore point selection and complete the restore process.
After System Restore finishes collecting data, the computer automatically restarts and the
Restoration Complete
screen appears.
5.
Click
OK
.
If you are not satisfied with the results of the restoration, you can repeat the preceding steps, using a different restore point, or you can
undo the restoration.
To undo a restoration, perform the following steps:
1.
Click the
Start
button, point to
All Programs
—
> Accessories
—
> System Tools
, and then click
System Restore
.
2.
Select
Undo my last restoration
and click
Next>
.
3.
Click
Next>
to confirm the restoration undo.
After System Restore finishes collecting data, the computer automatically restarts and the
Undo Complete
screen appears.
4.
Click
OK
.
Driver Rollback
Windows XP device Driver Rollback can replace a device driver with the previously installed version. When you install a new device driver that
causes system instability, use Driver Rollback to reinstall the previous drivers. In the event that Driver Rollback cannot reinstall your previous driver,
you can use System Restore to return your operating system to its state before the new device driver installation.
To use Driver Rollback, perform the following steps:
1.
Click the
Start
button, and then right-click
My Computer
.
2.
Click
Properties
.
3.
Click the
Hardware
tab, and then click
Device Manager
.
4.
In the
Device Manager
window, right-click the device for which the new driver was installed, and then click
Properties
.
5.
Click the
Drivers
tab, and then click
Roll Back Driver
.
User Accounts and Fast User Switching
Microsoft Windows XP includes a new feature that provides multiuser access to a single computer. Fast User Switching, which is available in both
the Home and Professional editions, allows users to access the computer with their specific settings, including the desktop and various
applications, without requiring the previous user to log off. New users log on and switch from the original user's session to their own. New users
can run their desktop and applications without interfering with the original user. When the original user returns, that user can switch back to the
desktop and applications with the original settings. All of this is accomplished without the delay of each individual user logging off the computer.
During setup, the computer administrator creates all the accounts that will be used on the computer. (For information on types of accounts and
adding new accounts, see "
How to Add Users
.") When the computer starts, the main user screen appears with all of the user names. From this
screen you select an account and log in to that session.
How to Use Fast User Switching
To access Fast User Switching, perform the following steps:
NOTE: Fast User Switching is the default user screen for both Home and Professional editions, but is disabled in Windows XP
Professional when the computer is a member of a computer domain.
Summary of Contents for OptiPlex GX150
Page 2: ...February 2002 08WUP A06 ...
Page 97: ...Back to Contents Page ...
