Dell OptiPlex GX150 User Manual Download Page 139

Page: 139 / 154

Connect the interposer board to the CD drive, ensuring that the data, power, and audio cables are attached to the interposer board.

Connecting the Interposer Board

—

Small Form-Factor System

Replacing the Optical Drive With the Combination Data Cable

1. Gently slide the drive into place until the tabs securely click into position.

2. Connect the interposer board to the optical drive.

Close the computer cover

Attaching Cables to an Optical Drive

—

Small Form-Factor Desktop System

Removing the Optical Drive

—

Small Desktop System and Small Mini-Tower System

Removing and Replacing the Drive Bracket Rails

—

Small Desktop and Small Mini-Tower System

If you are replacing an optical drive and bracket assembly, follow these instructions. If you are installing a new drive that does not have bracket rails

attached, connect it to the set of rails that are attached to the inside of the cover.

Interposer board

Optical drive interface connector

Combination data cable

System board diskette drive connector

System board interface (IDE2) connector

Drive

Bracket rails (2)

Screws (4)

Summary of Contents for OptiPlex GX150



























































































































































Search results

Summary of Contents for OptiPlex GX150

Reviews:

Related manuals for OptiPlex GX150

Brands by name

Popular brands

Dell OptiPlex GX150, User Manual

Search results

Summary of Contents for OptiPlex GX150

Reviews:

Related manuals for OptiPlex GX150

Brands by name

Popular brands