Dell OptiPlex GX150 User Manual Download Page 106

Page: 106 / 154

Back to Contents Page

Stand: Dell™ OptiPlex™ GX150 System User's Guide

Removing and Attaching the Small Form-Factor and Small Desktop Computer Stands

To remove the stand from the small form-factor and small desktop computers, perform the following steps:

1. Turn the computer over so that the stand is at the top.

2. Loosen the thumb screw and lift the stand away (see the following figures).

3. Place the computer in a horizontal position.

Small Form-Factor Computer Stand

Small Desktop Computer Stand

To attach the stand to the small form-factor and small desktop computers, perform the following steps:

Locator hole

Thumb screw

Locator hole

Thumb screw

Summary of Contents for OptiPlex GX150



























































































































































Search results

Summary of Contents for OptiPlex GX150

Reviews:

Related manuals for OptiPlex GX150

Brands by name

Popular brands

Dell OptiPlex GX150, User Manual

Search results

Summary of Contents for OptiPlex GX150

Reviews:

Related manuals for OptiPlex GX150

Brands by name

Popular brands