manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 87 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 87

Removing and Replacing Parts : Dell Inspiron 8100 

 

3.  To release the Mini PCI card assembly, spread the metal securing tabs until the 

assembly pops up slightly. 

4.  Disconnect the assembly from the wiring harness or internal antenna. 

5.  Lift out the assembly and disconnect any attached cables. 

Replacing the Mini PCI Card Assembly 

1.  Align the Mini PCI card assembly with the connector at a 45-degree angle, and 

press the Mini PCI card into the connector. 

2.  Depending on what type of Mini PCI card you are installing, either connect the 

wiring harness to the Mini PCI card assembly, or connect the mini-coax antenna 

cable to the Mini PCI card assembly and to the internal antenna. 

NOTICE: 

The connectors are keyed for correct insertion; do not force the 

connections. 

file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (14 of 56) [2/28/2004 7:37:23 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments