manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 127 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 127

Removing and Replacing Parts : Dell Inspiron 8100 

RJ-11/RJ-45 Board

NOTICE: 

Disconnect the computer and attached devices from electrical outlets 

and remove any installed batteries. 

NOTICE: 

To avoid ESD, ground yourself by using a wrist grounding strap or by 

periodically touching an unpainted metal surface on the computer. 

Removing the Protective Covers From the RJ-11 

and RJ-45 Connectors 

 

1.  Follow the instructions in "

Preparing to Work Inside the Computer

." 

2.  Remove one or both of the plastic connector covers (one or both of the covers 

may be installed) by slipping a nonmarring tool into the cutout at the top and 

pivoting the tool up to disengage the inner securing tab. 

To replace a connector cover, orient the cover notch-side-up and snap it into the 

file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (54 of 56) [2/28/2004 7:37:23 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments