manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 22 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 22

Power Conservation : Dell Inspiron 8100 

standby mode.

To activate standby mode:

●

     

Click the 

Start

 button, click 

Shut down

, click 

Stand by

, and then click 

OK

. 

or

●

     

Press the power button or the power conservation key combination, 

<Fn><Suspend>, that you programmed (via the 

Advanced

 tab). 

HINT: 

You can use the 

Advanced

 tab to program the display-close option, the 

power button, and the power conservation key combination to activate standby 

mode. 

To exit standby mode, press the power button, or if you activated standby mode by 

closing the display, open (raise) the display.

Hibernate Mode 

Hibernate mode conserves power by copying system data to a reserved area on the 

hard drive and then completely turning off the computer. When you exit hibernate 

mode, the application programs and files that were open before you activated 

hibernate mode are still open.

Your computer enters hibernate mode if the battery charge level becomes critically 

low, or if either the power button, the power conservation key combination, 

<Fn><Suspend>, or the display-close option are programmed to activate hibernate 

mode in the 

Advanced

 tab of the 

Power Options Properties

 window.

HINT: 

Some PC Cards may not operate correctly after resuming operation from 

hibernate mode. If you encounter problems with a PC Card, reinsert the card or 

restart your computer. 

To exit hibernate mode, press the power button. The computer may take a short time 

to return to its normal operating state. Pressing a key or touching the touch pad or 

track stick does not bring the computer out of hibernate mode.

file:///F|/Service%20Manuals/Dell/Inspiron/8100/power.htm (2 of 5) [2/28/2004 7:37:12 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments