manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 82 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 82

Removing and Replacing Parts : Dell Inspiron 8100 

 

NOTICE: 

Disconnect the computer and attached devices from electrical outlets 

and remove any installed batteries. 

NOTICE: 

To avoid ESD, ground yourself by using a wrist grounding strap or by 

periodically touching an unpainted metal surface on the computer. 

Removing the Fixed Optical Drive 

1.  Follow the instructions in "

Preparing to Work Inside the Computer

." 

2.  Loosen the captive screw on the bottom of the computer. 

NOTICE: 

To keep the pull tab from catching on the captive screw, turn the 

computer over before removing the fixed optical drive. 

3.  Turn the computer over, pull out the pull tab, and use the pull tab to remove the 

fixed optical drive. 

file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (9 of 56) [2/28/2004 7:37:23 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments