manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 113 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 113

Removing and Replacing Parts : Dell Inspiron 8100 

 

NOTICE: 

Disconnect the computer and attached devices from electrical outlets 

and remove any installed batteries. 

NOTICE: 

To avoid ESD, ground yourself by using a wrist grounding strap or by 

periodically touching an unpainted metal surface on the computer. 

NOTICE: 

The reserve battery provides power to the computer's RTC and 

NVRAM when the computer is turned off. Removing the palm rest disconnects 

the reserve battery and causes the computer to lose the date and time 

information as well as all user-specified parameters in NVRAM. If possible, make 

a copy of this information before you disconnect the reserve battery. 

1.  Follow the instructions in "

Preparing to Work Inside the Computer

." 

2.  Remove the 

hard drive

 and the 

fixed optical drive

. 

3.  Remove the 

keyboard assembly

. 

4.  Remove the 

hinge cover

. 

5.  Remove the 

display

. 

file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (40 of 56) [2/28/2004 7:37:23 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments