manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 17 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 17

A Tour of Your Computer : Dell Inspiron 8100 

Back View

 

Fan Exhausts 

HINT: 

The computer turns on the fan only when the computer gets hot. It may 

run most of the time or very seldom, depending on your use of the computer. 

Because the fan spins at a high rate of speed, it may make a noise. This noise is 

normal and does not indicate a problem with the fan or the computer. 

The fan works with the air intake to prevent the computer from overheating. When 

the computer gets hot, the small internal fan turns on and draws air through the air 

intake to cool the computer. Hot air is expelled through the fan exhaust.

 

CAUTION: 

Do not push objects into or block the air intake. Doing so can 

cause fire or damage interior components. Keep the opening free from 

dust and other foreign particles. 

AC Adapter Connector 

Use this connector to attach an AC adapter to the computer.

file:///F|/Service%20Manuals/Dell/Inspiron/8100/tour.htm (15 of 18) [2/28/2004 7:37:11 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments