manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 116 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 116

Removing and Replacing Parts : Dell Inspiron 8100 

3.  Remove the 

hinge cover

. 

4.  Remove the 

display assembly

. 

5.  Remove the 

palm rest assembly

. 

6.  On the underside of the palm rest, disconnect the flex cable from the ZIF 

connector. 

 

7.  Remove the two M2.5 x 4-mm screws securing the palm rest bracket. 

8.  While supporting the flex cable, lift out the palm rest bracket and turn it over. 

NOTICE: 

The reserve battery provides power to the computer's RTC and 

NVRAM when the computer is turned off. Removing the battery causes the 

computer to lose the date and time information as well as all user-specified 

parameters in NVRAM. If possible, make a copy of this information before you 

remove the reserve battery. 

9.  Disconnect the reserve battery cable. 

file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (43 of 56) [2/28/2004 7:37:23 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments