manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 126 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 126

Removing and Replacing Parts : Dell Inspiron 8100 

 

NOTICE: 

Disconnect the computer and attached devices from electrical outlets 

and remove any installed batteries. 

NOTICE: 

To avoid ESD, ground yourself by using a wrist grounding strap or by 

periodically touching an unpainted metal surface on the computer. 

Removing the Fan Assembly 

1.  Follow the instructions in "

Preparing to Work Inside the Computer

." 

2.  Remove the 

system board

. 

3.  Remove the three M2 x 4-mm screws from the fan assembly. 

4.  Disconnect the two fan cables from the system board. 

5.  Pull the fan assembly away from the back-panel bracket. 

NOTICE: 

When reconnecting the fan cables, connect the shorter cable to the 

connector closest to the fan assembly. Route both cables so that they will not 

be pinched by the thermal cooling assembly. 

file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (53 of 56) [2/28/2004 7:37:23 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments