manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 76 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 76

Removing and Replacing Parts : Dell Inspiron 8100 

Recommended Tools

●

     

Number 1 magnetized Phillips screwdriver 

●

     

Small flat-blade screwdriver 

●

     

Pry stick 

●

     

Small plastic scribe 

●

     

Microprocessor extractor 

●

     

Flash BIOS update program floppy disk or CD (required only when upgrading the 

microprocessor, replacing the reserve battery, or replacing the system board). 

NOTICE: 

If the computer is running Microsoft® Windows® Millennium Edition 

(Me), you need to download the operating system update utility for Windows Me 

from 

http://support.dell.com

 and install it before you upgrade the BIOS. 

Screw Identification

Before removing and replacing components, photocopy the screw placemat as a tool 

to lay out and keep track of the screws. The placemat provides the number of screws 

and the sizes.

file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (3 of 56) [2/28/2004 7:37:23 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments