manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 40 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 40

Solving Problems : Dell Inspiron 8100 

A program crashes 

See the software documentation—

 Many software 

manufacturers maintain websites with information that may help 

you to solve the problem.

A program stops responding 

Press <Ctrl><Alt><Del>—

 In the 

Close Program

 window, 

select the program that is no longer responding. Then click 

End 

Task

.

A solid blue screen appears 

Turn the computer off—

 If the computer does not respond to a 

keystroke or a proper shutdown, press the power button until the 

computer turns off. Press the power button again to restart the 

computer. The solid blue screen appears because you were not 

able to perform a proper Windows shutdown. ScanDisk will 

automatically run during the start-up process. Follow the 

instructions on the screen.

E-Mail Problems

Review "Sending and Receiving E-mail"—

 See "Setting Up" in 

the Dell 

Solutions Guide

 that came with your computer.

Ensure that you are connected to the Internet—

 With the 

Outlook Express e-mail program open, click 

File

. If 

Work Offline

 

has a check next to it, click the check to remove it and connect to 

the Internet.

file:///F|/Service%20Manuals/Dell/Inspiron/8100/solving.htm (15 of 18) [2/28/2004 7:37:14 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments