manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 36 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 36

Solving Problems : Dell Inspiron 8100 

 

If you cannot play a music CD or install a 

program from a CD 

HINT: 

High-speed CD drive vibration is normal and may cause noise. This noise 

does not indicate a defect in the drive or the CD. 

Ensure that Windows recognizes the drive—

 Double-click the 

My Computer

 icon. If the CD drive is not listed, perform a full 

scan with your antivirus software to check for and remove viruses. 

Viruses can sometimes prevent Windows from recognizing the 

drive.

Test the drive with another CD—

 Insert another CD to eliminate 

the possibility that the original CD is defective.

Clean the disc—

 See the 

Tell Me How

 help file for instructions.

Adjust the Windows volume control—

 Double-click the yellow 

speaker icon in the lower-right corner of your screen. Be sure that 

the volume is turned up and that the sound is not muted. 

file:///F|/Service%20Manuals/Dell/Inspiron/8100/solving.htm (11 of 18) [2/28/2004 7:37:13 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments