manualshive.com logo in svg

Dell Networking 8100 Series, Service Manual, Page: 81 / 129

Share
Download
Dell Networking 8100 Series Service Manual Download Page 81

Removing and Replacing Parts : Dell Inspiron 8100 

NOTICE: 

The disk drive is very sensitive to shock. Handle the assembly by its 

edges (do not squeeze the top of the hard drive case), and avoid dropping it. 

1.  Follow the instructions in "

Preparing to Work Inside the Computer

." 

2.  Close the display, turn the computer upside down on a flat work surface, and 

remove the main battery and secondary battery (if present). 

3.  Remove the M3 x 5-mm screw from the center of the hard drive door. 

4.  Slide the drive door up until the drive assembly tab disengages from the door 

slots in the bottom case assembly. 

5.  Carefully pull the drive assembly straight out of the bottom case assembly. 

Replacing the Hard Drive 

1.  Push the drive assembly into the hard drive opening on the left side of the 

computer. 

2.  Align the drive assembly tabs with the bottom case assembly slots and push 

down until it clicks into place. 

3.  Replace the M3 x 5-mm screw in the drive door. 

Fixed Optical Drive 

file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (8 of 56) [2/28/2004 7:37:23 AM]

Summary of Contents for Networking 8100 Series


































































































































Reviews:

No comments