Appendix
89
2
Locate the 3-pin password jumper (PSWD) on the system board (see page 51), and attach the
jumper plug to pins 2 and 3 to clear the password.
NOTE:
When you receive your computer, the jumper plug is attached to pins 1 and 2.
3
Close the computer cover (see page 77).
4
Connect your computer and monitor to electrical outlets, and turn them on.
5
After the Microsoft
®
Windows
®
desktop appears on your computer, shut down the computer.
(see page 43).
6
Turn off the monitor and disconnect it from the electrical outlet.
7
Disconnect the computer power cable from the electrical outlet, and press the power button
to ground the system board.
8
Open the computer cover (see page 49).
9
Locate the 3-pin password jumper on the system board (see page 51) and attach the jumper
to pins 1 and 2 to reenable the password feature.
10
Replace the computer cover (see page 77).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into
the computer.
11
Connect your computer and devices to electrical outlets, and turn them on.
PSWRD
