Removing and Installing Parts
71
NOTICE:
Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").
8
Reattach the front panel (see page 61).
9
Replace the computer cover (see page 77).
NOTICE:
To connect a network cable, first plug the cable in to the network wall jack and then plug it in to
the computer.
10
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
11
Enter system setup (see page 82) and update the appropriate
Diskette Drive
option.
12
Verify that your computer works correctly by running the Dell Diagnostics (see page 36).
CD/DVD Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the
Product Information Guide
.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
1
Follow the procedures in "Before You Begin" on page 43.
2
Remove the computer cover (see page 49).
3
Release and remove the front panel (see page 58).
power cable
data cable
