Dell Latitude 3000 Series Owner'S Manual Download

Page: 11 / 112

Setting Up and Using Your Computer

Turn on the printer and then turn on the computer. If the

Add New Hardware Wizard

window appears, click

Cancel

Install the printer driver if necessary. See the documentation that came with your printer.

Setting Up a Home and Office Network

Connecting to a Network Adapter

NOTE:

Plug the network cable into the network adapter connector on the computer. Do not plug the

network cable into the modem connector on the computer. Do not plug a network cable into a telephone
wall jack.

Connect the network cable to the network adapter connector on the back of your computer.

Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.

Connect the other end of the network cable to a network device.

parallel printer cable

parallel connector on computer

connector on printer

screws (2)

clips (2)

notches (2)

Summary of Contents for Latitude 3000 Series

















































































































Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands

Dell Latitude 3000 Series, Owner'S Manual

Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands