Dell Latitude 3000 Series Owner'S Manual Download

Page: 68 / 112

Removing and Installing Parts

www

.dell.com | support.dell.com

Reinstall the existing hard drive into the computer in front of the additional drive
(see page 65).

Connect a power cable to the drive.

Connect the data cable to the drive and to the system board (see page 51).

Replace the computer cover (see page 77).

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into

the computer.

Connect your computer and devices to electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software
required for drive operation.

front computer frame

bracket tabs (2)

drive slots (2)

drive bracket

bracket-securing
screw

additional hard drive

Summary of Contents for Latitude 3000 Series

















































































































Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands

Dell Latitude 3000 Series, Owner'S Manual

Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands