Dell Latitude 3000 Series Owner'S Manual Download

Page: 67 / 112

Removing and Installing Parts

NOTICE:

Ground yourself by touching an unpainted metal surface on the back of the computer.

NOTICE:

When you unpack the drive, do not set it on a hard surface, which may damage the drive.

Instead, set the drive on a soft surface, such as a foam pad, that will sufficiently cushion it.

Install the additional hard drive:

Place the two bracket tabs into the drive slots inside the computer’s front panel.

Swing the bracket forward so that it is flush with the computer’s front panel.

Replace the bracket-securing screws.

front computer frame

bracket tabs (2)

drive slots (2)

drive bracket

bracket-securing
screw

Summary of Contents for Latitude 3000 Series

















































































































Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands

Dell Latitude 3000 Series, Owner'S Manual

Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands