Dell Latitude 3000 Series Owner'S Manual Download

Page: 25 / 112

Solving Problems

Mouse Problems

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions

located in the

Product Information Guide

YOU

EXPERIENCE

OTHER

MEMORY

PROBLEMS

—

• Reseat the memory modules (see page 52) to ensure that your computer is successfully communicating

with the memory.

• Ensure that you are following the memory installation guidelines (see page 52).
• Your Dell Dimension™ computer supports DDR memory. For additional information on the type of

memory supported by your computer, see "Memory" on page 79.

• Run the Dell Diagnostics (see page 36).

LEAN

THE

MOUSE

—

See the

Dell Dimension Help

file for instructions on cleaning the mouse. To

access the help file, see

page 7

HECK

THE

MOUSE

CABLE

—

Check the cable connector for bent or broken pins and for damaged or frayed cables. Straighten bent
pins.

Remove mouse extension cables, if used, and connect the mouse directly to the computer.

Shut down the computer (see page 43), reconnect the mouse cable as shown on the setup diagram for
your computer, and then restart the computer.

ESTART

THE

COMPUTER

—

Simultaneously press <Ctrl><Esc> to display the

Start

menu.

Type

, press the keyboard arrow keys to highlight

Shut down

Turn Off

, and then press <Enter>.

After the computer turns off, reconnect the mouse cable as shown on the on the setup diagram for your
computer.

Start the computer.

EST

THE

MOUSE

—

Connect a properly working mouse to the computer, and try using the mouse.

HECK

THE

MOUSE

SETTINGS

—

Click the

Start

button, click

Control Panel

, and then click

Printers and Other Hardware

Click

Mouse

Try adjusting the settings.

Summary of Contents for Latitude 3000 Series

















































































































Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands

Dell Latitude 3000 Series, Owner'S Manual

Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands