Removing and Installing Parts
55
11
Replace the computer cover (see page 77).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into
the computer.
12
Connect your computer and devices to electrical outlets, and then turn them on.
13
Click the
Start
button, right-click
My Computer
, and then click
Properties
.
14
Click the
General
tab.
15
To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
Cards
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the
Product Information Guide
.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity
from your body before you touch any of your computer’s electronic components. You can do so by
touching an unpainted metal surface on the computer chassis.
Your Dell™ computer provides three slots for PCI cards.
PCI Cards
If you are installing or replacing a card, follow the procedures in the next section. If you are
removing but not replacing a card, see "Removing a PCI Card" on page 58.
If you are replacing a card, remove the current driver for the card from the operating system.
