Dell Latitude 3000 Series Owner'S Manual Download

Page: 75 / 112

Removing and Installing Parts

NOTICE:

Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").

Connect the power cable to the system board (see page 51).

Locate the data cable from the CD or DVD drive in the upper drive bay and connect its
middle data connector to the new drive.

Reattach the front panel (see page 61).

Replace the computer cover (see page 77).

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into

the computer.

Connect your computer and devices to electrical outlets, and then turn them on.

See the documentation that came with the drive for instructions on installing any software
required for drive operation.

power cable

first CD/DVD
connector
(primary drive)

second CD/DVD
connector (secondary
drive)

Summary of Contents for Latitude 3000 Series

















































































































Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands

Dell Latitude 3000 Series, Owner'S Manual

Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands