Dell Latitude 3000 Series Owner'S Manual Download

Page: 23 / 112

Solving Problems

A program stops responding

A program crashes repeatedly

NOTE:

Software usually includes installation instructions in its documentation or on a floppy disk or CD.

A program is designed for an earlier Windows operating system

A solid blue screen appears

THE

PROGRAM

—

Press <Ctrl><Shift><Esc> simultaneously.

Click

Applications

Click the program that is no longer responding.

Click

End Task

HECK

THE

SOFTWARE

DOCUMENTATION

—

If necessary, uninstall and then reinstall the program.

THE

ROGRAM

OMPATIBILITY

IZARD

—

The Program Compatibility Wizard configures a program so it runs in an environment similar to non-
Windows XP operating system environments.

Click the

Start

button, point to

All Programs

→

Accessories

, and then click

Program Compatibility

Wizard

In the welcome screen, click

Follow the instructions on the screen.

URN

THE

COMPUTER

OFF

—

If you are unable to get a response by pressing a key on your keyboard or

moving your mouse, press and hold the power button for at least 8 to 10 seconds until the computer
turns off. Then restart your computer.

Summary of Contents for Latitude 3000 Series

















































































































Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands

Dell Latitude 3000 Series, Owner'S Manual

Search results

Summary of Contents for Latitude 3000 Series

Reviews:

Related manuals for Latitude 3000 Series

Brands by name

Popular brands