Dell Inspiron 410 Service Manual Download Page 7

Page: 7 / 45

Replacing the Mini-Card

Follow the procedures in

Before You Begin

Align the notch on the Mini-Card with the tab in the system-board connector.

Insert the Mini-Card at a 45-degree angle into the system-board connector.

Press the other end of the Mini-Card down and replace the screw that secures the Mini-Card to the system-board connector.

Connect the appropriate antenna cables to the Mini-Card you are installing. The follwing table provides the antenna cable color scheme for the MIni-
Card supported by your computer.

Replace the drive bay (see

Replacing the Drive Bay

Replace the optical drive (see

Replacing the Optical Drive

Replace the top bracket (see

Replacing the Top Bracket

Replace the top cover (see

Replacing the Top Cover

10.

Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page

Mini-Card

screw

CAUTION:

The connectors are keyed to ensure correct insertion. Use of excessive force may damage the connectors.

CAUTION:

To avoid damage to the Mini-Card, ensure that there are no cables or antenna cables under the Mini-Card.

Connectors on the Mini-Card Antenna Cable Color Scheme

WLAN (2 antenna cables)

Main WLAN (white triangle)

Auxiliary WLAN (black triangle)

white

black

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Summary of Contents for Inspiron 410














































Search results

Summary of Contents for Inspiron 410

Reviews:

Related manuals for Inspiron 410

Brands by name

Popular brands

Dell Inspiron 410, Service Manual

Search results

Summary of Contents for Inspiron 410

Reviews:

Related manuals for Inspiron 410

Brands by name

Popular brands